Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Mount Prospect
Air duct cleaning in Mount Prospect, IL typically runs $380-$720 for a full residential system and should include camera inspection of the main plenum before any work begins. Most Mount Prospect homes built during the 1955-1972 suburban boom need more than surface vacuuming; their original octopus-style sheet-metal plenums develop pinhole leaks, separated joints, and disconnected branches hidden behind drywall from later furnace retrofits. Our Air Duct Cleaning crews coordinate dispatch from our Chicago office and carry Rotobrush and Nikro negative-pressure extraction systems to subdivisions throughout Mount Prospect, from the ranch blocks near Lions Park to the split-level streets off Rand Road. Call (224) 344-8881 for a written price before any work starts.
Why CleanRun Air Duct Cleaning Elk Grove Village Is Mount Prospect’s Preferred Air Duct Cleaning Company
We’ve served Mount Prospect since 2013, and the pattern here is unmistakable: entire subdivisions share the same 50-70-year-old duct generation, so our technicians recognize the failure modes block to block. The 365-Day Done Right Promise backs every job in writing, not as a policy buried in fine print. Our Documented Photo Record shows you the inside of every duct run, before and after, as a standard deliverable you keep.
Mount Prospect customers receive the same H.A.V.E.N. Standard treatment that governs all 52,000+ homes in our record: Haven Standard Clause 1 mandates a written price before any panel comes off, and Haven Standard Clause 3 means background-checked, uniformed technicians identified by name before arrival. No per-vent pricing. No “call for a quote.” Just a flat system price agreed in writing, then documented proof of what was done.
Our Free Second Opinion applies to any written estimate you’ve already received in Mount Prospect. Bring it. We’ll put our number next to it, itemized, with no obligation.
Our Air Duct Cleaning Services in Mount Prospect
Residential Duct Cleaning
Mount Prospect’s ranch and split-level homes present a specific challenge: basement-to-register sheet-metal runs that have outlasted two or three furnace replacements but were never designed for modern airflow rates. We perform full-system source removal with HEPA-contained negative-pressure extraction, agitating debris at the trunk line rather than pushing it deeper. In the original 1955-1972 subdivisions near Central Road and Busse Highway, we regularly find that a surface clean without joint sealing redeposits debris at the same plenum transitions within a single season. Our residential jobs include sealing with mastic at accessible joints as part of the standard scope, not an upsell.
Commercial Duct Cleaning
Mount Prospect’s commercial base along Rand Road and Elmhurst Road includes mid-century office buildings and retail spaces with hybrid duct systems, part original metal and part flex-duct retrofit from HVAC upgrades. We clean these with Abatement Technologies portable HEPA units and Rotobrush contact cleaning for hard duct, matching the method to the material. Every commercial job carries the same written price guarantee and photo documentation as our residential work.
Supply Duct Cleaning
The supply side in Mount Prospect’s older homes often tells the clearest story of neglect. We find crushed flex-duct splices from 1990s furnace retrofits, disconnected takeoffs sealed behind drywall, and deteriorating fiberglass liner shedding particles into bedrooms. Our supply duct service includes camera inspection of the main plenum to locate these hidden failures. On a 1962 split-level near Lions Park, our crew found the original octopus plenum under negative pressure but the two rear-bedroom branches completely disconnected - sealed behind drywall during a 2003 high-efficiency furnace install that reused the old duct chase. We ran camera inspection through the main trunk, recovered the crushed legacy runs, reconnected them with sealed takeoffs and mastic, then completed full-system source removal with HEPA filtration and agitation tools before balancing supply and return registers room by room.
Return Duct Cleaning
Return ducts in Mount Prospect’s postwar homes were often built with undersized sheet-metal trunks that create turbulence points where debris concentrates. The prolonged winter heating season here, with furnaces running nearly continuously from November through March, accelerates particulate loading in these returns. We clean with negative-pressure extraction at the return plenum, then verify airflow balance at each register. If the return trunk is original and unsealed, we document the joint condition in our photo record and note where sealing would extend the clean’s effectiveness.
Full System Cleaning
This is our recommended service for Mount Prospect’s 1955-1972 housing stock. Full System Cleaning covers supply and return trunks, all branch runs, the plenum, and the air handler cabinet. We include video inspection of the main plenum as standard - not optional - because the disconnected-branch pattern from 1990s-2000s furnace retrofits repeats so predictably in these subdivisions. The job concludes with a Documented Photo Record of every run, delivered to you as part of the standard job record.
Video Inspection
Camera inspection of the main plenum is standard practice on Mount Prospect jobs in a way it isn’t in staggered-growth suburbs. Because the failure pattern repeats block to block - disconnected legacy branches, crushed flex-duct splices, deteriorating liner - our technicians know where to look. The video becomes part of your job record, with timestamps and annotations. You see what we see before we quote any repair or sealing work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Mount Prospect
Our equipment roster includes Nikro and Rotobrush for contact cleaning and agitation, Honeywell media filters for replacement where original systems are upgraded, and Aprilaire whole-home air cleaners for customers adding filtration after a deep clean. We stock common Mount Prospect replacement parts - filter racks, plenum access panels, sealed takeoffs - to avoid delay when a 1960s system needs hardware that big-box stores no longer carry. Every brand we name can be verified independently; we don’t make performance claims beyond manufacturer specifications.
Common Air Duct Cleaning Problems We See in Mount Prospect Homes
- Original sheet-metal plenums with pinhole leaks and separated joints. The 1955-1972 buildout used galvanized steel that fatigues at seams after 50-70 years of thermal cycling. A vacuum-only clean without mastic sealing at these joints re-deposits debris at the same transition points within a season.
- Disconnected legacy branches from 1990s-2000s furnace retrofits. Contractors reused old duct chases for new high-efficiency venting, sealing original supply or return branches behind drywall. These dead legs trap moisture and debris, becoming mold reservoirs invisible without camera inspection of the main plenum.
- Deteriorating fiberglass duct liner shedding particles into the airstream. Original liner in Mount Prospect’s octopus plenums breaks down after decades of airflow. Techs who only vacuum visible register boots miss the liner breakdown farther down the trunk, where particles enter the supply air.
- Flex-duct retrofits creating hard-to-reach debris traps. Later HVAC upgrades spliced flexible duct into rigid metal trunks at awkward angles. The transition points collect debris that rotary brushes struggle to reach without proper agitation tools and negative-pressure containment.
Pricing for Air Duct Cleaning in Mount Prospect, IL
We publish ranges because Haven Standard Clause 1 requires a written price before any work starts. Here is what air duct cleaning costs in Mount Prospect’s market:
| Service | Typical Range |
|---|---|
| Residential full system cleaning (single furnace, up to 12 runs) | $380-$550 |
| Residential full system with video inspection and sealing | $520-$720 |
| Supply duct cleaning only (camera inspection included) | $280-$420 |
| Return duct cleaning only | $220-$340 |
| Commercial system (per air handler, varies by square footage) | $680-$1,400 |
Factors that move Mount Prospect jobs within these ranges: number of duct runs, accessibility of the plenum (crawl-space trunks common in ranches take longer), condition of original liner requiring source removal versus simple contact cleaning, and whether sealing work is needed at disconnected branches or separated joints. We do not quote per-vent. One flat price per system, agreed in writing, before any work begins. Call (224) 344-8881 for your specific number - estimates are free.
We Also Serve Cities Near Mount Prospect
Our crews work daily across the northwest Chicago suburbs. We provide Air Duct Cleaning in Mount Prospect and surrounding communities including Des Plaines, Arlington Heights, Palatine, and Elk Grove Village. Each city gets the same H.A.V.E.N. Standard treatment: written price first, documented photo record last, 365-Day Done Right Promise in between.
Serving Mount Prospect, IL - Our Local Coverage Area
We’re based in the Mount Prospect area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Mount Prospect
Camera inspection of the main plenum identifies disconnected legacy branches and crushed flex-duct splices that are hidden behind drywall from 1990s-2000s furnace retrofits. In Mount Prospect’s 1955-1972 subdivisions, this failure pattern repeats so predictably that we make plenum video standard on every job. The footage becomes part of your documented record, with annotations showing where debris traps or mold reservoirs exist before we quote any repair. Call (224) 344-8881 to schedule - estimates are free.
Yes, original sheet-metal joints in 1960s Mount Prospect homes typically show pinhole leaks and separated seams after 60 years of thermal cycling. Vacuuming without mastic sealing at these points redeposits debris within a season. Our full-system service includes accessible joint sealing as standard scope, not an upsell, because we’ve documented the same failure pattern across split-level blocks from Rand Road to Central Road. The written price covers both cleaning and sealing before any panel comes off.
Every 2-3 years for homes with original 1955-1972 ductwork, and annually if occupants have allergies, pets, or if the home has had a furnace retrofit that disturbed liner or left disconnected branches. The prolonged winter heating season in Mount Prospect, with furnaces running nearly continuously from November through March, accelerates particulate loading compared to milder climates. Hot, humid summers promote mold in low-clearance crawl-space trunk lines common in local ranches. Call (224) 344-8881 and we’ll assess your specific system condition with camera inspection.
Yes, and we specifically address the debris traps at flex-to-metal transitions that rotary brushes alone miss. Our Nikro and Rotobrush systems use agitation tools sized for both rigid trunk lines and flexible branch ducts, with HEPA-contained negative pressure to prevent debris migration. In Mount Prospect’s subdivisions, where flex-duct retrofits were spliced into original octopus plenums with minimal clearance, we photograph each transition before and after as part of your standard job record.
It removes accumulated debris, mold, and deteriorating fiberglass particles from the airstream; it restores designed airflow when disconnected branches are reconnected; and when paired with sealing, it stops the re-deposition cycle at leaking joints. It does not fix corroded metal or undersized trunks, which we document in your photo record with plain-language notes. The real value in Mount Prospect’s 50-70-year-old systems is the combination of source removal, camera-verified repair of hidden disconnections, and sealing at accessible joints - not vacuuming alone. Call (224) 344-8881 for a written scope and price specific to your home.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Mount Prospect since 2013.