Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterFast, Reliable Air Duct Cleaning Across Arlington Heights
Air duct cleaning in Arlington Heights typically runs $380-$720 for a full residential system, with most jobs completed in a single visit and a written price delivered before any panel comes off. Our crews coordinate dispatch from our Chicago office and carry the negative-pressure extraction rigs, Rotobrush agitation tools, and camera systems needed for the specific challenges of Arlington Heights housing stock. Call (224) 344-8881 for a written estimate - no “call for a quote” runaround, per Haven Standard Clause 1.
We’ve been working Arlington Heights homes since 2013, and the housing here is unlike the northwest suburbs built even twenty years later. The 1950s-70s ranch and split-level tracts that dominate Arlington Heights - from the neighborhoods near Recreation Park down to the blocks off Rand Road - were originally engineered as heat-only systems with galvanized sheet-metal trunks. When central A/C arrived in the 1970s and 1980s, contractors spliced flex-duct branches onto those metal trunks. Decades later, those junctions are debris dams that generic duct cleaning often misses entirely. That’s why our Air Duct Cleaning team photographs every run, before and after, and delivers the record as a standard job deliverable.
Why CleanRun Air Duct Cleaning Elk Grove Village Is Arlington Heights’s Preferred Air Duct Cleaning Company
Arlington Heights homeowners research before they call. They bought high - median home prices here have climbed steadily since 2015 - and they expect documentation, not promises. We’ve served over 52,000 homes since 2013, every one with a written price before work started and a Documented Photo Record when the crew left. The 365-Day Done Right Promise is backed in writing on every job, not buried in a policy manual.
Our technicians are background-checked and uniformed under Haven Standard Clause 3: Verified Crews, and they’re identified by name before arrival. We publish our equipment roster - Rotobrush, Nikro, Abatement Technologies - so customers can verify what enters their home. A Free Second Opinion on any written estimate is available at no cost; bring a competitor’s quote and we’ll put our number beside it in writing.
Scheduling is coordinated from our Chicago office, with crews serving Arlington Heights locally. Response to Arlington Heights inquiries is same-day during business hours, and all calls are answered by a live person, 24/7.
Our Air Duct Cleaning Services in Arlington Heights
Residential Duct Cleaning
Most Arlington Heights residential calls come from owners of 1950s-1970s ranches and split-levels in neighborhoods like Scarsdale, Hasbrook, and the blocks surrounding North School Park. These homes present a specific challenge: original galvanized sheet-metal trunk lines that terminate in flex-duct spurs added during A/C retrofits. Our residential service includes full negative-pressure extraction through every register, agitation at debris points, and camera verification at metal-to-flex junctions. The written scope specifies which runs are accessible and which require additional access - no surprises after the van arrives.
Commercial Duct Cleaning
Arlington Heights commercial work centers on the multi-unit buildings along Rand Road, Campbell Street, and the denser blocks near the Metra station. Shared supply and return trunks are common in these structures, and cleaning one unit without confirming trunk isolation is a recipe for re-quoting on-site. Our commercial protocol includes pre-job mechanical drawings review and confirmation of trunk isolation before the written price is finalized. We document the scope for property management records and deliver the photo record per building requirements.
Supply Duct Cleaning
Supply runs in Arlington Heights retrofitted systems often show the worst accumulation at the flex-to-metal transition, where reduced diameter and corrugated interior surface trap particulate that smooth metal trunks would pass through. Our supply-duct protocol uses Rotobrush agitation combined with negative-pressure extraction, with camera inspection at every junction. The photo record shows the condition at each transition point, not just a generic “after” shot from the register.
Return Duct Cleaning
Return ducts in Arlington Heights’s older homes frequently run through interior wall cavities or beneath concrete slabs - configurations that limit tool access and allow decades of accumulation without visible warning. Our return-duct service includes video inspection to locate blockages and assess cavity accessibility, with the written scope updated before any work proceeds. Where slab returns are involved, we explain the limitations and alternatives in plain language before the price is agreed.
Video Inspection
Video inspection is not an upsell here - it’s diagnostic necessity. Arlington Heights’s retrofitted systems hide their problems behind walls and at junctions no register view can reach. Our camera runs show the actual condition inside every duct, with footage included in the job record. Homeowners receive the video files as part of the standard deliverable, not as a separate charge.
Full System Cleaning
Full system cleaning in Arlington Heights means the complete supply and return network, the plenum (the distribution box where trunk lines branch), and all accessible trunk lines - with explicit attention to metal-to-flex transitions. The written scope itemizes each component, and the photo record documents every stage. This is the service we recommend for first-time cleaning of any 1960s-1980s Arlington Heights home with retrofitted A/C.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Arlington Heights
Our equipment roster includes Rotobrush agitation systems, Nikro negative-pressure rigs, and Abatement Technologies HEPA filtration - brands that publish specifications customers can verify independently. We stock common replacement components for Arlington Heights systems, including flex-duct connectors and register boots, so minor repairs identified during cleaning don’t require a return visit. Guardsman-treated materials are used where antimicrobial protection is specified. Every tool and material is named in the written scope before work begins.
Common Air Duct Cleaning Problems We See in Arlington Heights Homes
- Debris dams at metal-to-flex junctions in retrofitted systems. On a 1963 split-level off Dryden Place near the downtown core, our tech found the original galvanized trunk line terminating into three flex spurs that had been added during a 1979 A/C retrofit - those flex-to-metal junctions were packed with 40-plus years of drywall dust and pet hair, and the homeowner’s complaint of weak airflow in the back bedroom cleared up after our agitation tools and negative pressure rig pulled the dam loose.
- Shared trunk lines in multi-unit buildings discovered mid-job. Scheduling a full residential duct cleaning in a multi-unit Arlington Heights building without confirming shared supply and return trunks means crews arrive, then discover the trunk serves adjacent units and the scope has to be re-quoted on-site. We verify trunk isolation during the estimate phase, not after the truck is parked.
- Parking and equipment-access failures on denser downtown blocks. A negative-pressure truck-mount and 200-foot hose run can’t reach the mechanical room without a permitted street or alley staging spot. We confirm access during scheduling for Arlington Heights properties near the downtown core, where street parking is restricted and alleys are narrow.
- Dryer vent stacks shared through a building chase, cleaned only at the in-unit trap. Cleaning only the in-unit lint trap run and leaving the vertical common stack untouched is exactly where the lint pathway and fire risk concentrate. Our multi-unit protocol includes the common stack where accessible, with written confirmation of what was and was not reachable.
Pricing for Air Duct Cleaning in Arlington Heights, IL
Honest pricing means ranges you can use, not a teaser that balloons on arrival.
| Service | Typical Range in Arlington Heights |
|---|---|
| Full residential system cleaning (single-family, up to 12 registers) | $380-$550 |
| Full residential system cleaning (larger home, 13-20 registers) | $520-$720 |
| Video inspection only (diagnostic, no cleaning) | $180-$240 |
| Dryer vent cleaning (single-family, in-wall run) | $140-$220 |
| Commercial/multi-unit per-system cleaning | $320-$580 per air handler |
What moves the price: register count, accessibility of duct runs (slab returns and wall cavities take longer), condition severity documented during video inspection, and whether shared trunks in multi-unit buildings require coordination with adjacent units. Every Arlington Heights job starts with a written price before any work begins - no exceptions, per Haven Standard Clause 1. The price on the page is the price on the invoice. Call (224) 344-8881 for an exact quote; estimates are free.
We Also Serve Cities Near Arlington Heights
Our crews work throughout the northwest metro, including Arlington Heights and neighboring Palatine, Mount Prospect, Des Plaines, and Northbrook. Each city’s housing stock presents distinct duct configurations, and our protocols adapt accordingly - Arlington Heights’s retrofitted 1960s systems differ materially from the newer construction in parts of Hoffman Estates or South Barrington, and we scope accordingly.
Serving Arlington Heights, IL - Our Local Coverage Area
We’re based in the Arlington Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Air Duct Cleaning in Arlington Heights
Yes, where the common stack is accessible from the roof or a service chase, and we document in writing what was and was not reachable. The in-unit lint trap run is only part of the pathway; the vertical common stack is where lint accumulates and fire risk concentrates. Our multi-unit protocol includes stack inspection with camera where access permits, and the written scope specifies exactly which sections were cleaned before any work starts. Call (224) 344-8881 to schedule an estimate for your building.
Because generic cleaning often misses the debris dam at the flex-to-metal junction where your 1970s or 1980s A/C retrofit connects to the original galvanized trunk. Those junctions are prime accumulation points, and they’re not visible from any register. Our protocol includes camera inspection at every metal-to-flex transition, with agitation and extraction at the junction itself - not just the straight runs. The photo record shows you exactly what was found and what was removed. Call (224) 344-8881 if you’ve had a “cleaning” that didn’t solve the airflow problem.
We confirm access during scheduling, not after arrival. Denser blocks near the downtown core and along Campbell Street require permitted street or alley staging for our negative-pressure truck-mount and hose run. When access is restricted, we discuss alternatives - including smaller portable extraction units for certain configurations - and document the equipment plan in the written scope before the price is finalized. Call (224) 344-8881 and we’ll verify access for your specific address during the estimate call.
NADCA (National Air Duct Cleaners Association) standards require source-removal methods - agitation plus negative-pressure extraction - rather than passive vacuuming or chemical-only treatments. For Arlington Heights’s retrofitted systems, this matters because source removal is the only reliable way to clear debris dams at metal-to-flex junctions. Our equipment and protocols meet NADCA standards, and we can provide documentation on request. The practical difference: a NADCA-compliant job on a 1960s Arlington Heights system will include mechanical agitation at debris points and verified extraction, not just register-level vacuum noise. Call (224) 344-8881 to discuss what this means for your specific system.
The Chicago metro’s extreme seasonal swing - hot, muggy summers drawing Lake Michigan humidity indoors and brutally dry winters from continuous forced-air heating - causes Arlington Heights ductwork to cycle through condensation-prone conditions that promote mold and dust-mite debris. This makes annual or biennial cleaning more defensible here than in drier inland markets. Compounding this, Arlington Heights’s 1950s-70s housing stock features original galvanized trunks retrofitted with flex branches, creating debris-trapping configurations that newer, purpose-built systems simply don’t have. The combination of climate stress and mismatched duct geometry means accumulation happens faster and cleaning is more consequential. Call (224) 344-8881 for a video inspection to assess your system’s condition.
Written by Tomas Reyes, Owner at CleanRun Duct Repair & Cleaning, serving Arlington Heights since 2013.